| OUR SPECIALITIES |  |
| Micro-perforation | ||
The
required air flow through the fabric is achieved by burning an exact
number of tiny holes (approx. 0.4 mm) into the fabric. Such fabric,
if pre-filtered to EU3 at least, does not change the pressure loss
value and requires washing for aesthetic and hygienic reasons only. |
 |
|
| Membrane diffuser | ||
The
distribution of warm air into a room requires completely different
approach than the distribution of cold air. The membrane diffuser allows
the switching between these two operation modes and thus enables effective
heating and draught-free cooling. |
||
| Insulated ducting and noise silencers | ||
Insulated textile ducting is used for passing through areas which are not air-conditioned. Insulation reduces the heat loss and at the same time serves as a noise silencer.
|
 |
|
| Sequential and structured perforation, dampers | ||
Tests
and measurements proved that the layout of holes influences how the
air spreads from the diffuser. We have developed special layouts of
perforated holes ensuring more even air distribution. The static pressure
progression along the diffuser (and therefore the air output) can be
adjusted by utilising textile dampers. |
 |
|
| Double diffuser | ||
A perfect method for achieving balanced and perpendicular outlet from the holes in the fabric is the use of double diffuser. We recommend the use for short diffusers up to 5 m length where the effect of inclined outlet is most complicated.
|
||
| Suspension systems | ||
We have
been constantly dealing with improvement of suspension system that
contain tens
of original solutions. From a special hook, useful for wires and also
in profiles, through a complex system of aluminium profiles to tensioning
systems or stiffeners for better look. |
 |
|
| Textile nozzles | ||
A
very easy solution to achieve the furthest airflow reaches. Our philosophy
is, that textile air distribution must be fully washable and therefore
should contain as little non-textile elements as possible. Our textile
nozzles are additionally equipped with a damper for potential airflow
control, and can be delivered in a design allowing additional modification
of directing (by turning). |
 |
|
| Tensioning system in the profile | ||
|
Tensioning system in the profile results in balancing the creased fabric, folds resulting from location in the cardboard, and potentially minor insufficiencies in sewing. Fabric flexibility enables starching by 1% of length.
|
 |
|
 |
||
| Smoke tests | ||
|
Our testing room enables the preparation of smoke testing during air distribution at real condition simulation. It will provide the best image of air flow in the room.
|
||
| Our laundry | ||
Directly
at out manufacturing plant we have at disposal a laundry for maintenance
of diffusers. Thus we are able to provide constant professional servicing
to our customers. |
 |
|
