| 5 for Prihoda`s fabrics |
| 1/ High strength |
Our basic PMS/NMS/PMI/NMI fabrics show highest strength.
In the texture it is 2100 N/10mm, and 1100 N/10mm in the woof. Thanks
to these parameters, their rupture is practically out of the question. |
| 2/ Negligible outlet of particles |
Due to using endless fibres, all our
fabrics can be used in the so-called clean rooms up to the class 10000.
Laboratory tests demonstrated almost zero outlet of particles from materials
in operation. |
| 3/ Antibacterial effect |
Special treatment guarantees killing of bacteria
that are settled in the fabric. This effect does not vanish even after
multiple washing. After ten washing cycles it still conforms to the requirements
of relevant standard which means almost a lifetime effect, considering
low frequency of washing. |
| 4/ High fire resistance |
The PMI/NMI fabrics are certified according to EN
13501-1 with an excellent result. They achieve classification in B-s1,d0
class. There are fabrics in our range which even conform to the A class
requirements. |
| 5/ Easy to maintain |
Our fabrics made of endless fibres are very practical
and do not allow settlement of impurities from the passing air. This
air is distributed through the holes, and the textile diffusers remain
inside almost clean (in usual environment). They do not require additional
maintenance than outer dusting. Thanks to endless fibres, the look of
the fabric does not change even after many washing cycles, unlike materials
made of staple fibres.
|